SILCA Unocode F400 Electronic Key Machine With Camera Reader
Designed for specialist locksmiths, Silca’s Unocode F400 cuts flat vehicle and residential keys in a very efficient way, therefore improving the speed and quality of service to your customer. The machine incorporates several innovative elements including a camera reader that allows keys to be decoded by simply dropping them in the designated drawer, new software specifically tailored to the needs of professional key cutters and an optimized layout designed to make your job easier and more comfortable.
The intuitive software interface has been developed for the needs of professional locksmiths and includes shortcuts to the most popular cutting cards and job queues. The integrated industrial 10-inch touch-screen display tilts to give the perfect viewing angle and you have full connectivity with connection both via Wi-Fi and via Ethernet to the local LAN Network, 4 USB ports, a HDMI port to connect an external screen and the ability to connect a wireless keyboard and mouse.
The camera allows for fast optical decoding, there is no positioning required, simply drop the key in the pull-out compartment; the software shows the difference between the depths read and the depths defined by the manufacturer. The Unocode F400 is also easier and more comfortable to use, it is completely enclosed, the swarf is collected in the tray below the cutting area to leave the working area clean, the safety shield closes and opens automatically when starting or ending a cycle. The shield features two micro switches and stops automatically if obstructed to give additional protection and there is a 55% bigger working area compared to previous models for easier operation.
The 4 sided versatile clamp allows the effective clamping of a wide variety of keys, both with head and tip stop, it is nickel plated for better resistance to rust and wear and the software even shows which clamp side and which stop you should use. It is also quiet to operate with the new structure optimised to absorb vibrations and noise, there are less vibrations thanks to the new 80 teeth cutter in hard metal (widia) and a completely enclosed working area reduces noise during marking and cutting.
For the Unocode F Series key machines Silca have developed an entirely new software, engineered specifically to make your job easier and quicker. The new interface can also be customised according to your needs, so that you can keep within easy reach the functions you use most frequently. Cutting cards comparison available on board, code tables available on board and you can rename the cutting cards you use most frequently and reorder them according to your needs. Also when decoding a key, you don’t have to select a cutting card first. The camera reader decodes the key cuts and provides you with a shortlist of cards from which you can choose the one you need. There are also on-board video tutorials, a product manual and remote service to support you when needed.
The intuitive software interface has been developed for the needs of professional locksmiths and includes shortcuts to the most popular cutting cards and job queues. The integrated industrial 10-inch touch-screen display tilts to give the perfect viewing angle and you have full connectivity with connection both via Wi-Fi and via Ethernet to the local LAN Network, 4 USB ports, a HDMI port to connect an external screen and the ability to connect a wireless keyboard and mouse.
The camera allows for fast optical decoding, there is no positioning required, simply drop the key in the pull-out compartment; the software shows the difference between the depths read and the depths defined by the manufacturer. The Unocode F400 is also easier and more comfortable to use, it is completely enclosed, the swarf is collected in the tray below the cutting area to leave the working area clean, the safety shield closes and opens automatically when starting or ending a cycle. The shield features two micro switches and stops automatically if obstructed to give additional protection and there is a 55% bigger working area compared to previous models for easier operation.
The 4 sided versatile clamp allows the effective clamping of a wide variety of keys, both with head and tip stop, it is nickel plated for better resistance to rust and wear and the software even shows which clamp side and which stop you should use. It is also quiet to operate with the new structure optimised to absorb vibrations and noise, there are less vibrations thanks to the new 80 teeth cutter in hard metal (widia) and a completely enclosed working area reduces noise during marking and cutting.
For the Unocode F Series key machines Silca have developed an entirely new software, engineered specifically to make your job easier and quicker. The new interface can also be customised according to your needs, so that you can keep within easy reach the functions you use most frequently. Cutting cards comparison available on board, code tables available on board and you can rename the cutting cards you use most frequently and reorder them according to your needs. Also when decoding a key, you don’t have to select a cutting card first. The camera reader decodes the key cuts and provides you with a shortlist of cards from which you can choose the one you need. There are also on-board video tutorials, a product manual and remote service to support you when needed.
Features
- Safe and easy to use
- Versatile four-sided clamp
- Cleaner, safer and more comfortable working area
- Camera reader for fast optical decoding
- User-friendly software interface
- Integrated industrial 10-inch touch-screen display
Description
Designed for specialist locksmiths, Silca’s Unocode F400 cuts flat vehicle and residential keys in a very efficient way, therefore improving the speed and quality of service to your customer. The machine incorporates several innovative elements including a camera reader that allows keys to be decoded by simply dropping them in the designated drawer, new software specifically tailored to the needs of professional key cutters and an optimized layout designed to make your job easier and more comfortable.
The intuitive software interface has been developed for the needs of professional locksmiths and includes shortcuts to the most popular cutting cards and job queues. The integrated industrial 10-inch touch-screen display tilts to give the perfect viewing angle and you have full connectivity with connection both via Wi-Fi and via Ethernet to the local LAN Network, 4 USB ports, a HDMI port to connect an external screen and the ability to connect a wireless keyboard and mouse.
The camera allows for fast optical decoding, there is no positioning required, simply drop the key in the pull-out compartment; the software shows the difference between the depths read and the depths defined by the manufacturer. The Unocode F400 is also easier and more comfortable to use, it is completely enclosed, the swarf is collected in the tray below the cutting area to leave the working area clean, the safety shield closes and opens automatically when starting or ending a cycle. The shield features two micro switches and stops automatically if obstructed to give additional protection and there is a 55% bigger working area compared to previous models for easier operation.
The 4 sided versatile clamp allows the effective clamping of a wide variety of keys, both with head and tip stop, it is nickel plated for better resistance to rust and wear and the software even shows which clamp side and which stop you should use. It is also quiet to operate with the new structure optimised to absorb vibrations and noise, there are less vibrations thanks to the new 80 teeth cutter in hard metal (widia) and a completely enclosed working area reduces noise during marking and cutting.
For the Unocode F Series key machines Silca have developed an entirely new software, engineered specifically to make your job easier and quicker. The new interface can also be customised according to your needs, so that you can keep within easy reach the functions you use most frequently. Cutting cards comparison available on board, code tables available on board and you can rename the cutting cards you use most frequently and reorder them according to your needs. Also when decoding a key, you don’t have to select a cutting card first. The camera reader decodes the key cuts and provides you with a shortlist of cards from which you can choose the one you need. There are also on-board video tutorials, a product manual and remote service to support you when needed.
The intuitive software interface has been developed for the needs of professional locksmiths and includes shortcuts to the most popular cutting cards and job queues. The integrated industrial 10-inch touch-screen display tilts to give the perfect viewing angle and you have full connectivity with connection both via Wi-Fi and via Ethernet to the local LAN Network, 4 USB ports, a HDMI port to connect an external screen and the ability to connect a wireless keyboard and mouse.
The camera allows for fast optical decoding, there is no positioning required, simply drop the key in the pull-out compartment; the software shows the difference between the depths read and the depths defined by the manufacturer. The Unocode F400 is also easier and more comfortable to use, it is completely enclosed, the swarf is collected in the tray below the cutting area to leave the working area clean, the safety shield closes and opens automatically when starting or ending a cycle. The shield features two micro switches and stops automatically if obstructed to give additional protection and there is a 55% bigger working area compared to previous models for easier operation.
The 4 sided versatile clamp allows the effective clamping of a wide variety of keys, both with head and tip stop, it is nickel plated for better resistance to rust and wear and the software even shows which clamp side and which stop you should use. It is also quiet to operate with the new structure optimised to absorb vibrations and noise, there are less vibrations thanks to the new 80 teeth cutter in hard metal (widia) and a completely enclosed working area reduces noise during marking and cutting.
For the Unocode F Series key machines Silca have developed an entirely new software, engineered specifically to make your job easier and quicker. The new interface can also be customised according to your needs, so that you can keep within easy reach the functions you use most frequently. Cutting cards comparison available on board, code tables available on board and you can rename the cutting cards you use most frequently and reorder them according to your needs. Also when decoding a key, you don’t have to select a cutting card first. The camera reader decodes the key cuts and provides you with a shortlist of cards from which you can choose the one you need. There are also on-board video tutorials, a product manual and remote service to support you when needed.
Features
Features
- Safe and easy to use
- Versatile four-sided clamp
- Cleaner, safer and more comfortable working area
- Camera reader for fast optical decoding
- User-friendly software interface
- Integrated industrial 10-inch touch-screen display
Documents
Datasheet
Product Datasheet
