GJ LOCKS Pick for Tessa 6 L4V Cylinder Locks4Vans
This is a dedicated pick for LV4 Locks4Vans T series slam locks and euro deadlocks. The Tessa 6 cylinder is a very well made lock and they can be quite challenging to pick. You must understand the picking method that requires the user to determine the picking sequence for each lock. Once mastered, opening times of 3 to 5 minutes are achievable.
Now with improved Generation 3 blade that fits both the LD and LV profiles of the T Series cylinders.
Instructions For Use
1. Slide the pick into the keyway and use a fair to medium tension.
2. Rim cylinders and slam locks can typically only be picked in a single direction and if you get the wrong direction the pins won’t bind or reset when you release tension. For euro cylinders though try both ways and see which gives you a better feeling as one will give you more feedback. If you pick it in the locked direction then plug spin it to open
3. Touch each pin and look for tight or bound pins. Pins that readily move aren’t due to be picked yet.
4. For pins that are bound, manipulate them until they click (i.e. They go from tight to loose) and then repeat the process for the remaining bound pins. If you find the remaining pins all become loose or the barrel rotates by approximately 5 degrees and then go loose, then you’ve over lifted the last pin so reset and start over avoiding that pin.
5. Picking this lock type is very repeatable, meaning that each lock barrel will have its own picking order. You should make a conscious effort to note down the picking order as you go through so you can quickly get back on track if you take a wrong turn.
Now with improved Generation 3 blade that fits both the LD and LV profiles of the T Series cylinders.
Instructions For Use
1. Slide the pick into the keyway and use a fair to medium tension.
2. Rim cylinders and slam locks can typically only be picked in a single direction and if you get the wrong direction the pins won’t bind or reset when you release tension. For euro cylinders though try both ways and see which gives you a better feeling as one will give you more feedback. If you pick it in the locked direction then plug spin it to open
3. Touch each pin and look for tight or bound pins. Pins that readily move aren’t due to be picked yet.
4. For pins that are bound, manipulate them until they click (i.e. They go from tight to loose) and then repeat the process for the remaining bound pins. If you find the remaining pins all become loose or the barrel rotates by approximately 5 degrees and then go loose, then you’ve over lifted the last pin so reset and start over avoiding that pin.
5. Picking this lock type is very repeatable, meaning that each lock barrel will have its own picking order. You should make a conscious effort to note down the picking order as you go through so you can quickly get back on track if you take a wrong turn.
Features
- Generation 3 blade that fits both the LD and LV profiles of the T Series cylinders
- Supplied in a protective case
- Once you understand the picking method they can be opened successfully in 3 to 5 minutes
- To suit Tessa L4V Locks4Vans slam locks and euro deadlocks
Description
This is a dedicated pick for LV4 Locks4Vans T series slam locks and euro deadlocks. The Tessa 6 cylinder is a very well made lock and they can be quite challenging to pick. You must understand the picking method that requires the user to determine the picking sequence for each lock. Once mastered, opening times of 3 to 5 minutes are achievable.
Now with improved Generation 3 blade that fits both the LD and LV profiles of the T Series cylinders.
Instructions For Use
1. Slide the pick into the keyway and use a fair to medium tension.
2. Rim cylinders and slam locks can typically only be picked in a single direction and if you get the wrong direction the pins won’t bind or reset when you release tension. For euro cylinders though try both ways and see which gives you a better feeling as one will give you more feedback. If you pick it in the locked direction then plug spin it to open
3. Touch each pin and look for tight or bound pins. Pins that readily move aren’t due to be picked yet.
4. For pins that are bound, manipulate them until they click (i.e. They go from tight to loose) and then repeat the process for the remaining bound pins. If you find the remaining pins all become loose or the barrel rotates by approximately 5 degrees and then go loose, then you’ve over lifted the last pin so reset and start over avoiding that pin.
5. Picking this lock type is very repeatable, meaning that each lock barrel will have its own picking order. You should make a conscious effort to note down the picking order as you go through so you can quickly get back on track if you take a wrong turn.
Now with improved Generation 3 blade that fits both the LD and LV profiles of the T Series cylinders.
Instructions For Use
1. Slide the pick into the keyway and use a fair to medium tension.
2. Rim cylinders and slam locks can typically only be picked in a single direction and if you get the wrong direction the pins won’t bind or reset when you release tension. For euro cylinders though try both ways and see which gives you a better feeling as one will give you more feedback. If you pick it in the locked direction then plug spin it to open
3. Touch each pin and look for tight or bound pins. Pins that readily move aren’t due to be picked yet.
4. For pins that are bound, manipulate them until they click (i.e. They go from tight to loose) and then repeat the process for the remaining bound pins. If you find the remaining pins all become loose or the barrel rotates by approximately 5 degrees and then go loose, then you’ve over lifted the last pin so reset and start over avoiding that pin.
5. Picking this lock type is very repeatable, meaning that each lock barrel will have its own picking order. You should make a conscious effort to note down the picking order as you go through so you can quickly get back on track if you take a wrong turn.
Features
Features
- Generation 3 blade that fits both the LD and LV profiles of the T Series cylinders
- Supplied in a protective case
- Once you understand the picking method they can be opened successfully in 3 to 5 minutes
- To suit Tessa L4V Locks4Vans slam locks and euro deadlocks
Documents
Datasheet
Product Datasheet
